OPERATION
and the display will show the time - 00:00.
Touch to mute the beeping. The appliance
switches to standby mode.
Lighting
Select the LIGHTING menu and touch . The
following items will be available:
Use the sensors to select the desired
lighting option and touch
selection is stored by the appliance and the
SETTINGS upper level menu is displayed.
When continuous lighting mode is selected,
the light will be on continuously during the
programme (heating function) or when the
oven door is opened.
When this option is selected, the lighting will
be on for 30 seconds when you touch any
sensor during a programme (heating function).
When oven door is opened, light is turned on
for as long as the oven door is open, but no
longer than 10 minutes, after which the light
Tones
Select the tones menu and touch . The fol-
lowing items will be available:
Use the sensors to select the desired
option and touch
is stored by the appliance and the SETTINGS
upper level menu is displayed.
Display brightness
Select the menu and
touch . The display brightness expressed in
% will be shown on the display.
DISPLAY BRIGHTNESS
Use the sensors to adjust display bright-
ness within 0-100% range in 1% steps. Touch
to store the selected display brightness
level. The selection is stored by the appli-
ance and the SETTINGS upper level menu
is displayed.
Service
Select the SERVICE menu and touch . The
following message will be shown.
SERVICE
If the appliance detects an error, its code will
be displayed on the screen.
Factory settings
Select the menu
and touch . The following message will be
shown.
55
To Next Page
Loading...
Need help?
General
