Conversational mode
117
Manual calibration (without a probe).
In this mode, only the active tool can be calibrated and
it may be a milling tool or a lathe tool.
The CNC will show the necessary data and will update
the help graphics according to the selected tool.
A. Machine data. Position of the axes, tool and active
tool offset, real spindle speed and real feedrate of the
axes.
B. Area to define the calibration data.
C. Drawing indicating that tool calibration is allowed. If
the drawing is not displayed, some of the data is
missing. This diagram, which blinks, indicates that
the tool is active and, therefore, it can be calibrated.
To Next Page
Loading...
