22/07/2019
43
SERVICE MANUAL
EVO FRONT LOADING DISHWASHER
minute.
• Remove the basket from the appliance and handle the dishes/cutlery with gloves or clean hands to prevent
contamination. Be careful as the dishes will be hot.
• Do not dry the dishes with kitchen towels or cloths that are not sterile.
• Operators must strictly observe all hygiene requirements when handling clean dishes and cutlery.
To stop the wash cycle before it has finished:
• Models with START button: press START
• Models with cycle SELECTOR switch: Turn the SELECTOR switch to another position.
• Models with ON/OFF button: Press the ON/OFF button and switch off the machine.
The CONTINUOUS WASH P3 cycle stops when P3 is held down for more than 3s with the hood closed.
Selecting the wash cycle:
55 - 65 ºC / 131 - 149 ⁰F
Boiler temp. 80 - 85 ºC / 176 - 185 ⁰F
The cycle should be selected according to the dirt on the dishes:
Short cycle (for dishes which are not very dirty).
Medium/standard cycle (for fairly dirty dishes).
Long cycle (for very dirty dishes or dishes with dried-on dirt).
PG (Program Glass): Glass wash cycle with rinse temperature of 65 ºC / 149 ºF.
In the ADVANCE model, the technical service may modify the following parameters in any of the cycles at the
request of the user and under their responsibility:
Wash temperatures
[55÷71 ºC] / [131÷159 ºF]
Rinse temperatures
[65÷85 ºC] / [149÷185 ºF]
Cycle times
Wash: P1: 39s[35s÷60s] / P2: 59s[55s÷80s] / P3: 104s[100s÷500s] / PG: 74s[70s÷95s]
Rinse: 11s [10s-14s]
9.6.1. ADVANCE HYDRAULIC DIAGRAM
To Next Page
Loading...
