EasyManua.ls Logo

Fagor Evo Concept Series User Manual

Fagor Evo Concept Series
66 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ES: INSTRUCCIONES DE INSTALACIÓN, USO Y MANTENIMIENTO
FR: INSTRUCTIONS D'INSTALLATION, D'UTILISATION ET D'ENTRETIEN
EN: INSTALLATION, USAGE AND MAINTENANCE INSTRUCTIONS
DE: INSTALLATIONS, GEBRAUCHS UND WARTUNGSANLEITUNG
IT: ISTRUZIONI PER L'INSTALLAZIONE, L'USO E LA MANUTENZIONE
CODE: 12114010
REV.:11/2014
Lavavajillas
Lave-vaisselles
Dishwashers
Geschirrs pülmaschinen
Lavastoviglie

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Fagor Evo Concept Series and is the answer not in the manual?

Fagor Evo Concept Series Specifications

General IconGeneral
Capacity14 place settings
Control TypeElectronic
Noise Level44 dB
Special FeaturesChild lock
ProgramsIntensive, Eco, Glass, Quick

Summary

General Measurements and Connections (MOD. A,B-12)

Connection Points A-G (MOD. A,B-12)

Details of water, drain, electrical, rinse aid, and detergent connections.

Control Panel Overview

Model A Control Panel

Explanation of buttons and indicators for Model A.

Model B Control Panel

Explanation of buttons and indicators for Model B.

Quick Start-up Guide (Model A)

Model A Operation Steps

Visual step-by-step instructions for operating Model A.

Quick Start-up Guide (Model B)

Model B Operation Steps

Visual step-by-step instructions for operating Model B.

General Information and Warnings

Product Details and Specifications Plate

Overview of the product's purpose and location of the specifications plate.

Installation Instructions

Removal of Packaging and Levelling

Steps for unpacking and correctly positioning the machine.

Electrical Connection

Guidelines for safe and compliant electrical hook-up.

Hydraulic and Drainage Connections

Hydraulic Connection Requirements

Details on water quality, pressure, and pipe connections.

Drainage Connection

Instructions for setting up the machine's drainage system.

Use and Maintenance Instructions

Rinse Aid and Detergent Dispensers

Information on installing and adjusting dispensers.

Pressure Pump and Recycling

Guidance on pressure pump installation and product recycling.

Machine Operation

Control Panel Symbols and Machine Start-up

Explanation of control panel indicators and how to switch on the machine.

Filling and Heating Process

Details on how the machine fills with water and heats it up.

Washing Procedures

Dish Preparation and Cycle Selection

Steps for preparing dishes and choosing a wash cycle.

Stopping Cycles and Cold Rinse

How to stop cycles and perform a cold rinse.

Drainage and Regeneration

Drainage Pump and Regeneration Cycle

Instructions for using the optional pump and the regeneration process.

Machine Shutdown and Cleaning

Procedures for switching off and cleaning the machine daily.

Useful Tips

Maintenance and Chemical Handling

Advice on routine maintenance and safe handling of detergents.

Hygiene and Optimal Results

Tips for hygiene regulations and achieving optimal washing results.

Prolonged Non-Use

Instructions for storing the machine during long periods of inactivity.

Faults, Alarms, and Breakdowns

Common Faults and Solutions

Table listing common issues, their causes, and recommended solutions.

Error Diagnosis and Recycling

MOD.B Error Diagnosis

Table detailing specific error codes and their consequences for Model B.

Product Recycling and WEEE Compliance

Information on environmentally responsible disposal of the product.

Related product manuals