· 8 ·
MACHINERY DIRECTIVE
Safe Torque Off function satisfies the requirements:
IEC 61800-5-1 Ed.2.0
IEC 61800-5-2 Ed.2.0 (SIL 2)
IEC 61508-1 Ed.2.0 (SIL 2)
IEC 61508-2 Ed.2.0 (SIL 2)
IEC 61508-4 Ed.2.0 (SIL 2)
EN ISO 13849-1:2015 (Cat. 3, PL d)
which are certified in:
Certificate No.:
Z10 17 09 80353 007
TÜV SÜD, Notified Body 0123
Units whose manufacturing date is the same as or later than 2012-05 comply with this
certificate. The date appears on the version label stuck on the outside of the drive.
Equipment included:
Are excluded the equipment with CAN communication and drives:
In Mondragón, September 2017
AXD X.XXX-A1-X-X AXD X.XXX-SI-X-X SPD X.XXX-A1-X-X SPD X.XXX-SI-X-X
AXD X.XXX-S0-X-X AXD X.XXX-SD-X-X SPD X.XXX-S0-X-X
AXD X.XXX-C0-X-X ACD X-XXX-XX-X-X MMC X.XXX-XX-XX.XX-X-X-X
SPD X.XXX-C0-X-X SCD X-XXX-XX-X-X CMC X.XXX-XX-XX.XX-X-X-X
To Next Page
Loading...