41
The residual heat indicator
Once a hot cooking zone is switched o, "H" is displayed on the relevant cooking zone display
to warn that the "cooking zone is still hot!"
Do not touch the cooking zone
at thistimeowing to theriskof
burns from residual heat, and do
not place on it any objects sensi-
tive to heat!
When the residual heat indicator goes out,
cooking zone can be touched, however keep
in mind that it may still be warmer than ambi-
ent temperature.
The "H" residual heat indicator
is not displayed during a power
outage.However,cookingzones
may still be hot!
Limit the operating time
In order to increase eciency, the hob is t-
ted with a operating time limiter for each of
the cooking zones. The maximum operating
time is set according to the last heat setting
selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched o and the
residual heat indicator is activated. However,
you can switch on and operate individual
cooking zones at any time in accordance with
the operating instructions.
Cookingheat
setting
Maximum operat-
ing time (hours)
1 10
2 5
3 5
4 4
5 3
6 2
7 2
8 2
9 1
OPERATION