Fagor PBP3VE201FTQN - Page 42

42
When the set time has elapsed, a brief acoustic signal is sounded repeatedly.
The relevant cooking zone display (3) will show"0"indicatingthe zoneis
switchedoandtimerdisplay(9)willshow"00".
To change the heat setting of a cooking zone with an activated timer, select the desired
cooking zone using the cooking zone selection sensor eld (2) and then set the desired
heat setting using (+)(5) or (-)(4) sensor elds.
Timer
If the appliance is equipped with a timer
marked with T*, it can be used to set the
operating time of any cooking zone.
First touch (2) to select the desired cooking
zone and then touch Timer sensor (8) hen,
while the indicator light (10) is ashing touch
(+)(5) or (-)(4) sensor elds to set the desired
operating time for the selected cooking zone.
Timer will only start counting down when timer
display (9) shows a value higher than zero.
Turnotheappliance
The appliance operates when at least one
cooking zone is on. Pressing the on/o sensor
eld (1) switches o the appliance, and the
letter (“H”) for residual heat appears on the
cooking zone display 3.
1
3
3
3
4
3
3
10
9
3
5
8
2
2
10 10
*On selected models
OPERATION