Fagor QC-PDS - Mechanical Installation

QCQR-24/36 Q uer C us - Power Drive System. Q uick R eference. Ref.2003
7.2 Mechanical installation
Preparing the fasteners
Use the holes and slots prepared for the purpose of fastening the equipment. It is essential to avoid vibrations. Where necessary,
use shock-absorbing lanyards. ALWAYS use the clamp provided as an accessory for the size |0 modules. The reason for
installing this clamp is to join the size |0 module with the adjacent module in order to avoid or minimize vibrations. See figures
below.
373
3939
78
QC-PS-025
15
R3.05
MAIN FILTER 42A-A
QC-PS-025 / QC-DR-X-FX / QC-DR-X+X-FD2
3 N·m
M5
RECOMMENDED
WASHER
DIN 125, M5
39
QC-DR-X-FX QC-DR-X-FX
QC-DR-X+X-FD2
39 39 39 39
78
3 N·m
M5
RECOMMENDED
WASHER
DIN 125 M5
45 32
314
MAINS
LOAD
A
B
A
3 N·m
M5
RECOMMENDED
WASHER
DIN 125, M5
B
70
78 78
A
B
8
12.5
12.5
15
R3.05
R3
25.5
7.1
R6
9
19.5
R3
7.9
19.5
3 N·m
M5
RECOMMENDED
WASHER
DIN 125, M5
INSTALL THE MAIN FILTER 42A-A
NEXT TO THE POWER SUPPLY.
Dimmensions in mm, 1 in = 25.4 mm
42A-A
15
R3.15
MAIN FILTER 75A-A
QC-PS-045 / QC-DR-X-FX / QC-DR-X+X-FD2
5 N·m
M6
RECOMMENDED
WASHER
DIN 125 M6
A
5 N·m
M6
RECOMMENDED
WASHER
DIN 125, M6
B
INSTALl THE MAIN FILTER
75A-A NEXT TO THE POWER
SUPPLY
A
B
7.5
10
10
15
R3.15
QC-APS-15
Dimmensions mm, 1 in = 25.4 mm
373
39
78
39
QC-DR-X-FX QC-DR-X-FX
QC-DR-X+X-FD2
39 39 39 39
78
80
78 78
QC-PS-045
QC-APS-15
A
B
29.5 39
39
39
75A-A
MAINS
LOAD
60
255
7.5
3 N·m
M5
RECOMMENDED
WASHER
DIN 125, M5
3 N·m
M5
RECOMMENDED
WASHER
DIN 125, M5
R3
25.5
7.1
R6
9
19.5
R3
7.9
19.5
M5
3 N·m
RECOMMENDED
WASHER
DIN 125, M5
RECOMMENDED
WASHER
DIN 125, M5
3 N·m
M5
R3
7.9
19.5
39
9
R3
R6
39
19.5
7.1
25.5