Fagor Xperta CAT-44 NG - Setting the Coffee Temperature; Setting the Switch-Off Time

After the programming, the display
returns in the main menu to the menu
point «LANGUAGE».
To return to the coffee mode, press the
„Menu“ key (Fig. 3, f) or wait ca.
30sec. for the machine to return auto-
matically to the coffee mode.
12.2 Setting the Coffee Temperature
There are five temperature levels to
choose from. The coffee temperature
levels are defined as follows:
•«TEMPERATURE 1» = „luke warm“
•«TEMPERATURE 2» = „warm“
•«TEMPERATURE 3» = „normal“
•«TEMPERATURE 4» = „hot“
•«TEMPERATURE 5» = „extra hot“
The factory setting is
«TEMPERATURE 3». You can
change this setting as follows:
Press the „Menu“ key (Fig. 3, f) .
The menu point «LANGUAGE»
appears.
Press the paging keys or (Fig. 3, c
or d) until the menu point
«TEMPERATURE» appears.
Confirm the menu point with the „OK“
key (Fig. 3, g). The display shows the
current setting, e.g. «TEMPERATURE
3».
Where necessary select a different
temperature, using the paging keys
or (Fig. 3, c or d).
When the required temperature is indi-
cated, confirm this with the „OK“ key
(Fig. 3, g). This temperature is now pro-
grammed.
After programming, the display returns
automatically in the main menu to the
menu point «TEMPERATURE».
To return to the coffee mode, press the
„Menu“ key (Fig. 3, f) or wait ca.
30 sec. for the machine to return auto-
matically to the coffee mode.
12.3 Setting the Switch-off
Time
If the coffee machine is not used for a
set amount of time, it automatically
switches off for safety and economy
reasons.
You can choose between five switch-
off times (automatic switch-off after
1 to 5 hours):
« SHUT OFF TIME 1h » = 1 hour
« SHUT OFF TIME 2h » = 2 hours
«
SHUT OFF TIME 3h » = 3 hours
«
SHUT OFF TIME 4h » = 4 hours
« SHUT OFF TIME 5h » = 5 hours
The factory setting is «SHUT OFF
TIME 1h». You can change this set-
ting as follows:
Press the „Menu“ key (Fig. 3, f) .
The menu point «LANGUAGE»
appears.
Press the paging keys or (Fig. 3, c
or d) until the manu point «SHUT
OFF TIME» appears.
Confirm the menu point with the „OK“
key (Fig. 3, g). The display indicates the
current setting, e.g. «SHUT OFF
TIME 3h».
Where necessary, select a different
switch-off time with the paging keys
or (Fig. 3, c or d).
When the required switch-off time is
indicated, confirm this with the „OK“
key (Fig. 3, g). This switch-off time is
now programmed.
After the programming, the display
returns automatically in the main
menu to menu point «SHUT OFF
TIME».
To return to the coffee mode, press the
„Menu“ key (Fig. 3, f) or wait ca.
30 sec. for the machine to return auto-
matically to the coffee mode.
GB