What to do if my Fairland Heat Pump display is normal but there is no heating?
If your Fairland Heat Pump's display is normal, but it's not heating, it might be due to the set temperature being too low. Ensure you set the temperature to a proper heating level. Also, consider that there might be a 3-minute start delay; wait patiently to see if the heating starts.
Why is my Fairland Turbo Silence IXR56 Heat Pump not running?
If your Fairland Heat Pump isn’t running, it could be due to several reasons: * There might be no power. In this case, wait until the power recovers. * The power switch might be off. Ensure the power switch is turned on. * A fuse might have burned out. Check the fuse and replace it if necessary. * The breaker might be off. Check the breaker and turn it on.
What to do if Fairland Turbo Silence IXR56 fan is running but with insufficient heating?
If your Fairland Heat Pump's fan is running but there is insufficient heating, check for the following: * The evaporator could be blocked. Remove any obstacles. * The air outlet might be blocked. Clear any obstructions. * There may be a 3 minutes start delay. Wait patiently.
General| Category | Heat Pump |
|---|---|
| Noise Level | 52 dB |
| Max Water Pressure | 300 kPa |
| Operating Temperature Range (Heating) | -15 ~ 43 °C |
| Operating Temperature Range (Cooling) | 10°C to 45°C |
| Model | IXR56 |
Essential safety tips for installation, use, and maintenance.
Warnings regarding fire sources, ventilation, and professional installation.
Contacting service centers and operator qualifications for maintenance.
Crucial warnings on usage, handling, fire prevention, and specific operational notes.
Explanation of defrosting processes and routine cleaning procedures.
Procedures for draining water and ensuring flow to prevent freezing damage.
Steps for testing the unit after installation, including startup sequence and noise checks.
Table listing common operational issues, their causes, and recommended solutions.
To Next Page