What to do if my Fairland Heat Pump doesn’t run?
If your Fairland Heat Pump isn’t running, here are a few things to check: * **No power:** Wait until the power recovers. * **Power switch:** Ensure the power switch is turned on. * **Fuse:** Check the fuse and replace it if it's burned. * **Breaker:** Check if the breaker is off and turn it on.
Why is my Fairland TurboSilence InverX IXCR26 Heat Pump fan running but with insufficient heating?
If the fan in your Fairland Heat Pump is running but there's insufficient heating, it could be due to: * **Evaporator blockage:** Remove any obstacles blocking the evaporator. * **Air outlet blockage:** Clear any obstructions from the air outlet. * **Start delay:** Note that there may be a 3-minute start delay, so please wait patiently.
What to do if my Fairland Heat Pump display is normal, but there is no heating?
If your Fairland Heat Pump display is normal, but there is no heating, consider the following: * **Temperature setting:** Ensure that the set temperature isn't too low. Adjust it to a proper heating temperature. * **Start delay:** Note that there may be a 3-minute start delay, so please wait patiently.
General| Model | TurboSilence InverX IXCR26 |
|---|---|
| Category | Heat Pump |
| Cooling Capacity | 26 kW |
| Refrigerant | R32 |
| Operating Temperature Range (Heating) | -15°C to 24°C |
Covers essential warnings for use, professional installation, keeping away from fire, and ventilation.
Instructions for transportation, storage, and maintenance notices.
Details package contents, operating conditions, and advantages of different operational modes.
Covers specific reminders on water usage, handling, and fire prevention.
Guides on responding to abnormal circumstances and lists common non-failure codes.
Ensures correct pre-operation setup and explains control panel symbols and basic functions.
Details on screen locking/unlocking, temperature adjustment, and mode selection.
Explains screen icons, temperature settings, and how to select Booster, Smart, or Silence modes.
Instructions for regular cleaning, checking components, and preparing the unit for winter.
Provides detailed technical specifications for various heat pump models.
Guidance on safe handling, storage, and critical notices before installation.
Details on selecting an installation site with proper ventilation and sufficient clearance.
Instructions for secure mounting, water pump setup, condensation management, and electrical connections.
Wiring diagrams for different power supplies and specifications for protective devices and cables.
Steps for inspection, trial operation, annual maintenance, and winterizing the unit.
Lists common issues, their causes, and recommended solutions for troubleshooting.
Provides a comprehensive list of display codes indicating operational status or faults.
Optional wiring diagram for heating priority with a 230V, ≤500W water pump.
Optional wiring diagram for heating priority with a 230V, >500W water pump.
Optional wiring diagram for heating priority with a 400V water pump.
Details on connecting the water pump in parallel with a filtration clock.
Guides on obtaining the Fairland app and creating a user account.
Steps for verifying mobile number/email and setting up family members and device rooms.
Instructions for connecting the heat pump to the Wi-Fi network and binding it to the app.
Explains how to control heating/cooling, set temperature, and select modes using the mobile app.
Steps for sharing access to the heat pump with family members through the app.
Guides family members on logging in and notes regarding app updates.
To Next Page