What to do if my Fairland Heat Pump display is normal but there is no heating?
If your Fairland Heat Pump's display is normal, but it's not heating, it might be due to the set temperature being too low. Ensure you set the temperature to a proper heating level. Also, consider that there might be a 3-minute start delay; wait patiently to see if the heating starts.
Why is my Fairland Turbo Silence IXR36 Heat Pump not running?
If your Fairland Heat Pump isn’t running, it could be due to several reasons: * There might be no power. In this case, wait until the power recovers. * The power switch might be off. Ensure the power switch is turned on. * A fuse might have burned out. Check the fuse and replace it if necessary. * The breaker might be off. Check the breaker and turn it on.
What to do if Fairland Turbo Silence IXR36 fan is running but with insufficient heating?
If your Fairland Heat Pump's fan is running but there is insufficient heating, check for the following: * The evaporator could be blocked. Remove any obstacles. * The air outlet might be blocked. Clear any obstructions. * There may be a 3 minutes start delay. Wait patiently.
Essential safety warnings, product usage instructions, and installation precautions.
Guidelines for handling, storing, and maintaining the heat pump.
Overview of contents, operating conditions, modes, and important reminders.
Instructions for operating the heat pump, daily maintenance, and winterizing.
Detailed technical data and parameters for different heat pump models.
Guidelines for moving the unit and initial installation notices.
Steps for locating, installing, and detailing the heat pump unit.
Guidance on electrical connections, protection devices, and post-installation trials.
Procedures for maintenance, troubleshooting faults, and understanding error codes.
Information on external controls, Wi-Fi setup, and mobile app usage.
To Next Page
General