d.
Installation must be stopped if any gas leakage,
maintenance center.
3. Transportation & Storage
a.
Sealing is not allowed during transportation
b.
Transporting goods at a constant speed is needed to avoid sudden acceleration or sudden braking,
so as to reduce the co
c.
The unit must be far away from any source of fire.
d.
Storage place must be bright, wide, open and good ventilation, ventilation equipment is required.
4. Maintenance Notice
a.
If maintenance or scrap is required, contact an authorized service
b. Qualification requirement
All operators who dispose gas
must be qualified by valid certification which issued by professional
agency.
c.
Please strictly comply with the requirement from manufacturer wh
Please r
efer to the technical service manual.
2
Installation must be stopped if any gas leakage,
and the
Sealing is not allowed during transportation
Transporting goods at a constant speed is needed to avoid sudden acceleration or sudden braking,
The unit must be far away from any source of fire.
Storage place must be bright, wide, open and good ventilation, ventilation equipment is required.
If maintenance or scrap is required, contact an authorized service
must be qualified by valid certification which issued by professional
Please strictly comply with the requirement from manufacturer wh
en maintenance or filling gas.
efer to the technical service manual.
professional
Transporting goods at a constant speed is needed to avoid sudden acceleration or sudden braking,
Storage place must be bright, wide, open and good ventilation, ventilation equipment is required.
must be qualified by valid certification which issued by professional
en maintenance or filling gas.