Need help?Do you have a question about the Falcon Fusion and is the answer not in the manual?
Details global/dual SIM, GPRS, and UHF radio reporting for various alarm types and test signals.
Covers hardwired inputs, AC supply monitoring, relay outputs, Contact ID, and serial interfaces for alarm panels.
Explains full programming and software updating via computer serial port.
Describes status/error indication via seven-segment display and serial port selection via push-button.
Covers power supply, antennas, AC check, dry contacts, Contact ID, serial port, and relay outputs.
Guide on connecting the Falcon Fusion to the 12V supply and observing its start-up display.
Emphasizes GSM network quality for reliable alarm transmission and signal strength display.
Instructions for dual SIM models to select the SIM card with highest signal strength for connectivity.
Details selecting alarm panel serial port format via push-button or software.
Explains seven-segment display for status/errors and onboard push-button functions.
Describes using the push-button for serial port selection, programming mode, and UHF signal testing.
Information on using Windows software utility and FSK USB cable for configuration.
Details global/dual SIM, GPRS, and UHF radio reporting for various alarm types and test signals.
Covers hardwired inputs, AC supply monitoring, relay outputs, Contact ID, and serial interfaces for alarm panels.
Explains full programming and software updating via computer serial port.
Describes status/error indication via seven-segment display and serial port selection via push-button.
Covers power supply, antennas, AC check, dry contacts, Contact ID, serial port, and relay outputs.
Guide on connecting the Falcon Fusion to the 12V supply and observing its start-up display.
Emphasizes GSM network quality for reliable alarm transmission and signal strength display.
Instructions for dual SIM models to select the SIM card with highest signal strength for connectivity.
Details selecting alarm panel serial port format via push-button or software.
Explains seven-segment display for status/errors and onboard push-button functions.
Describes using the push-button for serial port selection, programming mode, and UHF signal testing.
Information on using Windows software utility and FSK USB cable for configuration.
General| Modulation Mode | GFSK |
|---|---|
| Spread Spectrum | FHSS |
| Frequency Range | 2.400 - 2.4835 GHz |
| Output Power | 100 mW |
| Working Current | 120 mA |
To Next Page
