Falcon Fusion - 3.4 Changing the Default SIM Card

Example:
If an adequate signal strength is not obtained:
Ÿ Move the Falcon Fusion to a more suitable location
Ÿ Fit the Falcon Fusion with a higher gain antenna (available
from FSK)
Ÿ Change the default sim on dual sim Falcon Fusions
3.4 Changing the Default SIM Card (Applicable to dual SIM Falcon
Fusions only)
The Falcon Fusion has the option of changing the default SIM
card to be used. The default SIM card should be changed to the
one with the highest signal strength.
To do so:
Ÿ Briefly press the push-button until the Falcon Fusion swaps
SIM cards and restarts using the new SIM card
Global sim:
Connected on network with priority 1;
signal strength 6
Dual sim:
Connected on sim 1; signal strength 6
The minimum signal strength required for good remote connectivity
is 5.
Falcon Fusion Installation and Operation Manual I
13