2. FEATURES & FUNCTIONS
2.1 Reporting Options
§ Global /dual SIM card operation for enhanced network
reliability
§ GPRS reporting to a control room
§ UHF radio reporting in the event of GSM failure and jamming.
These refer only to high priority alarms such as burglary,
panic, fire and medical events
§ UHF test signals get sent to the control room on power-up
and every 23 hours. The event code sent is E603 (RF periodic
test)
2.2 Interfaces
Ÿ 7 Hardwired inputs with positive trip, negative trip or both
Ÿ Dedicated AC Supply monitoring input
Ÿ 2 onboard relay outputs which can be controlled by GPRS
Ÿ Contact ID tip and ring telephone interface to all leading
control panels
Ÿ Serial alarm interface to leading control panels
Ÿ Over-the-air panel uploading and downloading on the Rhino
and Texecom Premier control panels through the serial
interface
2.3 Programming
Ÿ Full programming and software updating via a computer serial
I Falcon Fusion Installation and Operation Manual
6
To Next Page
Loading...