Falcon G6478 - User Manual

RZZ 349 Ref. 1
G6478 STEAMING OVEN
INSTALLATION and
SERVICING INSTRUCTIONS
The appliance must be installed and serviced by a competent person as stipulated by the Gas Safety
(Installation & Use) Regulations.
IMPORTANT
The installer must ensure that the installation of the appliance is in conformity with these instructions and
National Regu lations in force at the time of installation. Particular att ention MUST be paid to -
Gas Safety (Installatio n & Use) Regulations
Health And Safety At Work etc. Act
Local and National Building Regulations
Fire Precautions Act
The appliance has been CE-marked on the basis of compliance with the Gas Appliance Directive for the
Countries, Gas Types and Pressures as stated on the Data Plate.
WARNING - TO PREVENT SHOCKS, ALL APPLIANCES WHETHER
GAS OR ELECTRIC, MUST BE EARTHED
On completion of the installation, these instructions should be left with the Engineer-in-Charge for reference
during servicing. Further to this, The Users Instructions should be handed over to the User, having had a
demonstration of the operation and cleaning of the appliance.
IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING AND
COMMISSIONING THIS APPLIANCE. FAILURE TO COMPLY WITH THE SPECIFIED PROCEDURES MAY
RESULT IN DAMAGE OR THE NEED FOR A SERVICE CALL.
PREVENTATIVE MAINTENANCE CONTRACT
In order to obtain maximum performance from this unit we would recommend that a Maintenance Contract be
arranged with AFE SERVICELINE. Visits may then be made at agreed intervals to carry out adjustments and
repairs. A quotation will be given upon request to the contact numbers below.
Falcon Foodservice Equipment
HEAD OFFICE AND WORKS
PO Box 37, Foundry Loan, Larbert.
Stirlingshire. Scotland. FK5 4PL
AFE SERVICE LINE CONTACT -
PHONE - 01438 363 000 FAX - 01438 369 900
Detailed recommendations are contained
in Institute of Gas Engineers
published documents :
IGE/ UP/ 1, IGE/ UP/ 2
BS6173 and BS5440

Summary

SECTION 1 - INSTALLATION

VENTILATION

Requirements for adequate ventilation to ensure safe combustion and removal of harmful by-products.

GAS SUPPLY

Instructions for connecting the appliance to the gas supply, including pipework and safety checks.

WATER SUPPLY

SECTION 2 - ASSEMBLY and COMMISSIONING

BURNER ADJUSTMENT

ASSEMBLY

CONNECTION TO GAS SUPPLY

Procedures for connecting the appliance to the gas supply, including governor requirements.

CONNECTION TO WATER SUPPLY

PRE-COMMISSIONING CHECK

Essential checks to be performed after installation and assembly to ensure proper operation.

Gas Soundness

Procedure to check the gas supply system for leaks after installation.

Burner Operating Pressure

How to check and adjust the burner operating pressure for natural gas and propane.

Low Flame Setting

Procedure to set the low flame pressure and adjust the low flame setting screw.

Flame Failure Device

Troubleshooting steps for the Flame Failure Device (FFD) and pilot burner.

Ignition

Procedure to check smooth ignition of pilot and main burners after adjustments.

INSTRUCTION TO USER

SECTION 3 - SERVICING and CONVERSION

GAS CONVERSION CHECK LIST

IGNITION SYSTEM FAULTS

Troubleshooting guide for common ignition system faults, including pilot ignition issues.

Falcon G6478 Specifications

General

Brand	Falcon
Model	G6478
Category	Oven
Language	English