Falcon T Series Service Manual

iii
T-Series Service Manual
Introduction
Introduction
This manual contains a complete listing of T-Series (Grade 1) cylindrical lock parts and assemblies manufactured by
the Falcon Lock Company. This edition lists components of T-Series locks manufactured after July 2007.
Exploded views of each lock chassis and trim assemblies are provided with an accompanying chart to identify parts
for replacement purposes. In addition, this manual provides general cylinder information, many auxiliary components
of the T-Series cylindrical locks and installation instructions.
Standard Features*
Certifications ANSI A156 .2, Series 4000, Grade 1, UL Listed for 3-hour fire door.
Latch
156” x 256M”, Square corner faceplate, 1” housing diameter, 56O” throw.
Strike
56M” x 4(6”, ANSI, Square corner, no box.
Backset
26M”
Cylinder 6-Pin solid brass, keyed 5-pin, Falcon G keyway, keyed different (KD)
Door Range
16M” – 256” standard
Keys Two nickel silver cut keys per lock, keyed 5-pin, Falcon G keyway
* Locks are furnished with standard features unless otherwise specified.
Lock Assembly Drawing Index
The Lock Assembly Drawing Index provides visual representations and textual descriptions of available functions.
Page numbers for full trim and chassis drawings are referenced.
Outside Inside
Key
Push button
Electrified
Deadlatch
Springlatch
Turn/push button
Knurled Knob
Fixed Lever

Falcon T Series Specifications

General

Grade	ANSI/BHMA Grade 2
Keypad	Yes
Backup Key	Yes
Type	Electronic Lock
Backset	Adjustable 2-3/8" or 2-3/4"
Material	Metal
Finishes	Satin Nickel
Power Source	Battery
Battery Life	Approximately 1 year
Auto-Lock	Yes
Installation	Easy installation with a screwdriver