SYSTEM SYSTEM tab page Units
Setting to simultaneously set all units to METRIC or NON-METRIC.
Use the + and – key on the alpha-numeric keyboard to change individual values.
SYSTEM SYSTEM tab page Access
Change password
AdvancedMode
Setting of a password to protect advanced user settings (option More) from use by non-
authorised users.
The password must contain four numbers.
Enter code 1111 to deactivate the password protection.
When the correct password has been entered, all user screens can be accessed.
The system will request the password again, if the controller is not used for a few
minutes.
Change password
EditMode.
Setting of a password to protect advanced user settings ( ) from use by non-authorised
users.
The password must contain four numbers.
Enter code 1111 to deactivate the password protection.
When the correct password has been entered, all user screens can be accessed.
The system will request the password again, if the controller is not used for a few
minutes.