Fancom LUMINA 16 - 5 System

Lumina 16
System
21
SYSTEM
SYSTEM  SYSTEM  tab page Common
Clock type
Setting of the 12 or 24 hour time indication.
Time and Date
Setting of the current time and date
Computer name
Setting of the name of the control computer.
Computer number
Setting of the sequence number of the control computer in the network.
Language
Setting of the program language.
S2S MasterSlave
Master/Slave setting. If the control computer is included in a network, only one control
computer in the network must be set as MASTER. Set all the other control computers
as SLAVE.