Need help?Do you have a question about the Fancom LUMINA 16 and is the answer not in the manual?
Details how the control computer manages natural and mechanical ventilation systems.
Explains the various heating control types and temperature zone management.
Describes the control methods for cooling units, including ON/OFF and modulating types.
Covers the control of humidity levels using ON/OFF and time-modulating methods.
Guidelines for selecting an appropriate and safe installation location for the device.
Step-by-step instructions for physically mounting the Lumina 16 unit.
Procedures for connecting the Lumina 16 to power, manual switches, and signal wires.
Introduces the main installation menu and its access method.
Outlines the sequence of steps required for control computer installation.
Explains how inputs/outputs are connected and how addresses are structured.
Detailed configuration of ventilation systems, including combi-tables and air inlets.
Configuration for heating, cooling, and humidification controls.
Configuration for assigning a relay for the thermo differential alarm system.
To Next Page
General