FangLing F2300T(A/B) - User Manual

F2000 Series Shape Cutting Control System Operation and Installation Manual
i
FangLing Shape Cutting Control System
Operation and Installation Manual
(Ver.2.1)
(Apply to F2000 series: F2100B/T、F2200B/T、F2300(A/B)、
F2300T(A/B)、F2500(A/B)、F2500T((A/B)、F2600T)
Shanghai FangLing Computer Software Co., LTD.
2014-04

Summary

User Guide

High Voltages

Safety warnings regarding high voltage hazards during operation and installation.

Chapter 1 F2000 Series Control System Introduction

1.3 Technical Indicator

Specifies the technical specifications and performance indicators of the system.

1.5 Hardware Configuration

Details the hardware components and specifications for different F2000 models.

Chapter 2 Starting up of System

2.2 Power on Processing and Main Interface

Explains the system startup sequence and the main interface display.

Chapter 3 Cutting Function

3.2 Speed Regulation

Details on how to adjust cutting and manual movement speeds.

3.5 Edge Cutting; Offset Cutting; Return

Covers functions for edge cutting, offset cutting, and returning to paused points.

3.7 Oxygen Gas Preheat Time Regulation

Explains how to adjust preheat time for oxygen gas cutting.

3.8 Perforation Point Selection

Describes how to select or modify perforation points during cutting.

3.12 Arc THC Instruction

Instructions for using the Arc THC module in F2000 series CNC systems.

Chapter 4 Part Option

4.3 Angle Adjustment

Explains how to adjust the cutting angle based on the steel plate position.

4.4 Array

Describes different methods for arranging parts in matrix, staggered, or nested patterns.

Chapter 5 Manual Function

5.1 Fixed Moving Function

Explains the manual movement function where the torch moves when a key is pressed.

5.4 Breakpoint Recovery

Instructions for recovering from a paused cutting process or power outage.

Chapter 7 Parameter Setting

7.1 Common Parameters

Details on setting common parameters like cutting speed and kerf value.

7.2 Flame Parameters

Configuration settings specific to oxygen fuel gas cutting operations.

7.3 Plasma Parameters

Configuration settings specific to plasma cutting operations.

7.4 Powder Parameters

Settings related to powder coating or spraying functions.

7.5 System Parameters

Configuration of system-level parameters like pulses and speed limits.

7.6 Parameter Import

Instructions on importing system parameters from external files.

7.7 Parameter Export

7.8 Save Parameters

Chapter 8 Diagnosis Function

8.2 Input Diagnosis

8.3 Output Diagnosis

8.5 System Self-check

Initiates a self-diagnostic routine for the control system.

8.7 System Definition

Allows for custom definition of system settings, I/O, and coordinates.

Chapter 9 Graph Management

9.1 Choose Graph

Chapter 10 Code Explanation

10.1 Code Symbol and Interpretation

10.3 G Code Explanation

Details the supported G-codes for controlling machine movements and operations.

10.4 M Code Explanation

Explains the M-codes used for controlling functions like cutting device activation.

Chapter 11 Port Explanation

11.1 Input Port

11.1.1 Input Wiring Instructions

Provides wiring diagrams and instructions for system input ports.

11.1.2 Remote Controller Input

11.2 Output Port

11.2.1 Output Wiring Instructions

Wiring instructions for various output functions like gas control and torch movement.

11.3 Motor Port

11.3.1 Typical Wiring Diagram of the Motor Interfaces

Wiring diagrams for connecting motor drivers (stepper and servo).

11.4 Arc THC Module Interface (THC)

Details the interface for the Arc THC module in F2000T systems.

11.4.1 DC MOTOR Interface Instruction

11.4.2 Arc Import Instruction

11.4.5 Wiring Diagram of F2100 T CNC System with Arc THC Module

Overall wiring diagram for F2100T system with Arc THC module.

11.4.6 Wiring Diagram of double approach switch

Chapter 12 Use of BIOS

12.1 System Upgrade

Instructions for upgrading the system software via BIOS.

12.4 System Backup

How to perform a system backup of the operating system.

12.5 System Reset

Procedure to return the system to its backed-up state.

Chapter 13 Installation and Debugging

13.1 Horizontal; Vertical Pulses Number Setting

Guide to setting horizontal and vertical pulse numbers for axis movement.

Appendix 3 Interpretation of Wiring Connection between F2000 Series and Common THC

A3.1 Connection with F1620;F1630 THC

A3.2 Connection with HYD THC

FangLing F2300T(A/B) Specifications

General

Brand	FangLing
Model	F2300T(A/B)
Category	Cutter
Language	English