FangLing F2300(A/B) - User Manual

F2000 Series Shape Cutting Control System Operation and Installation Manual
i
FangLing Shape Cutting Control System
Operation and Installation Manual
(Ver.2.1)
(Apply to F2000 series: F2100B/T、F2200B/T、F2300(A/B)、
F2300T(A/B)、F2500(A/B)、F2500T((A/B)、F2600T)
Shanghai FangLing Computer Software Co., LTD.
2014-04

Summary

Chapter 1 F2000 Series Control System Introduction

Technical Indicator

Details the technical specifications and performance metrics of the system.

System Interface

Describes the various input and output interfaces of the control system.

Hardware Configuration

Outlines the hardware specifications for different F2000 series models.

Chapter 2 Starting up of System

Power on Processing and Main Interface

Explains the system startup sequence and the main operational interface.

Chapter 3 Cutting Function

Speed Regulation

Details how to adjust and control cutting and movement speeds.

Frame and Arc THC Instruction

Information on frame walking and instructions for the Arc THC module.

Chapter 7 Parameter Setting

Common Parameters

Setting of common parameters like cutting speed, kerf, and corner speed.

Flame and Plasma Parameters

Configuration of parameters specific to flame and plasma cutting processes.

Parameter Import, Export, and Save

Procedures for importing, exporting, and saving system parameters.

Chapter 8 Diagnosis Function

System Definition and Configuration

Customizing system settings, IO definitions, and parameter management.

Chapter 10 Code Explanation

Code Symbol Interpretation and Coordinate System

Explains programming symbols and the Descartes coordinate system.

G Code Explanation

Details common G codes used for movement, cutting, and arcs.

M Code Explanation

Describes M codes for controlling cutting devices and program flow.

Chapter 11 Port Explanation

Input Port and Wiring Instructions

Details input ports, their definitions, and wiring instructions.

Output Port and Wiring Instructions

Details output ports, their definitions, and wiring instructions.

Motor Port and Wiring

Information on motor ports, signal definitions, and connection methods.

Arc THC Module Interface

Instructions for connecting and using the Arc THC module.

Chapter 12 Use of BIOS

System Upgrade

Steps for upgrading system software via flash disk.

Chapter 13 Installation and Debugging

Horizontal; Vertical Pulses Number Setting

Guidance on setting horizontal and vertical pulse numbers for motor control.

Chapter 14 Shanghai FangLing F1500 Remote Controller

Wiring Connection of F1500 System

Illustrates the wiring connections between the F1500 remote and CNC system.

Appendix 3 Wiring Connection Interpretation

Connection with F1620;F1630 THC

Wiring details for connecting F2000 series to F1620/F1630 THC.

Connection with HYD THC

Connection with SH-HC30 THC

Connection with ONTIME THC

Connection with PTHC-2

FangLing F2300(A/B) Specifications

General

Brand	FangLing
Model	F2300(A/B)
Category	Cutter
Language	English