FangLing F2500(A/B) - User Manual

F2000 Series Shape Cutting Control System Operation and Installation Manual
i
FangLing Shape Cutting Control System
Operation and Installation Manual
(Ver.2.1)
(Apply to F2000 series: F2100B/T、F2200B/T、F2300(A/B)、
F2300T(A/B)、F2500(A/B)、F2500T((A/B)、F2600T)
Shanghai FangLing Computer Software Co., LTD.
2014-04

Summary

User Guide

Work Condition

Specifies the required environmental and operational conditions for the controller.

High Voltages

Details safety precautions related to high voltage components and operation.

Chapter 1 F2000 Series Control System Introduction

1.1 System Brief Introduction

Overview of the F2000 series system and its core features.

1.2 Characteristics of System

Details the key features and capabilities of the F2000 system.

1.3 Technical Indicator

Specifies the technical parameters and performance indicators of the system.

1.5 Hardware Configuration

Details the hardware specifications for different F2000 series models.

Chapter 2 Starting up of System

2.2 Power on Processing and Main Interface

Describes the system startup sequence and the main operational interface.

2.3 Function Index of Main Interface

Provides a visual index of functions accessible from the main interface.

Chapter 3 Cutting Function

3.2 Speed Regulation

Covers methods for adjusting cutting and manual movement speeds.

3.5 Edge Cutting; Offset Cutting; Return

Describes functions for edge cutting, offset adjustments, and returning to points.

3.6 Back to Reference Function

Explains how to return the system to its reference point.

3.7 Oxygen Gas Preheat Time Regulation

Covers settings and adjustments for oxygen gas preheat timing.

3.8 Perforation Point Selection

Details how to select and manage perforation points during cutting.

3.12 Arc THC Instruction

Instructions for Arc THC module typical for 'T' models.

Chapter 4 Part Option

4.3 Angle Adjustment

4.4 Array

4.6 Select Row;Number

Chapter 5 Manual Function

5.1 Fixed Moving Function

5.2 Continuous Moving Function

5.3 Fixed-length Moving Function

5.4 Breakpoint Recovery

Details how to resume operations from a saved breakpoint after interruption.

Chapter 7 Parameter Setting

7.1 Common Parameters

Configures general cutting and movement parameters.

7.2 Flame Parameters

Sets parameters specific to oxygen fuel gas cutting operations.

7.3 Plasma Parameters

Sets parameters specific to plasma cutting operations.

7.4 Powder Parameters

Configures parameters related to powder coating and spraying processes.

7.5 System Parameters

Adjusts system-wide settings like pulses, speed limits, and motor parameters.

7.6 Parameter Import

7.7 Parameter Export

7.8 Save Parameters

Chapter 8 Diagnosis Function

8.2 Input Diagnosis

8.3 Output Diagnosis

8.4 Keyboard Diagnosis

8.5 System Self-check

8.7 System Definition

Chapter 10 Code Explanation

10.1 Code Symbol and Interpretation

Explains the programming symbols and codes used in the cutting system.

10.2 Coordinate System

10.3 G Code Explanation

Details the supported G-codes for motion control and operations.

10.4 M Code Explanation

Explains the M-codes used for controlling machine functions and cycles.

Chapter 11 Port Explanation

11.1 Input Port

11.2 Output Port

11.3 Motor Port

11.4 Arc THC Module Interface (THC)

Interface details for Arc THC module in F2000 series CNC system.

11.5 Power Input Instruction

Chapter 12 Use of BIOS

12.1 System Upgrade

Procedure for upgrading the system software via BIOS.

12.2 Welcome Interface Upgrade

12.3 Movement Control Upgrade

12.4 System Backup

12.5 System Reset

Chapter 13 Installation and Debugging

13.1 Horizontal; Vertical Pulses Number Setting

Guides on setting horizontal and vertical pulse numbers for motor control.

Appendix 1 G M Code Rapid Consult

G Code Table

A quick reference table for common G codes.

M Code Table

A quick reference table for common M codes.

FangLing F2500(A/B) Specifications

General

Brand	FangLing
Model	F2500(A/B)
Category	Cutter
Language	English