Chapter 12 Use of BIOS
108
Chapter 12 Use of BIOS
When the system powers on, it will display as shown in Fig 12.1.
Press F2 to run BIOS
Auto boot after: 3
Fig 12.1 Power on
When press DEL before the system counts down to 0, the system will enter the
BIOS. If other keys are pressed, the system will enter in before counting down to 0.
F1 - System software update(系统升级)
F2 -Welcome picture update (欢迎界面升级)
F3 -Motion update (运动控制升级)
F4 -System backup (系统备份)
F5 - System recovery(系统还原)
F6 -Start system (启动系统)
Fig 12.2 BIOS interface
To Next Page
Loading...
