Chapter 6 File Operation
48
F1 DiskFile F2 UDisk F3 Search
F4
EditFile
F5 DelFile F6 CopyToU
F7
Preview
F8 OK
1: SHAPELIB/SHAPE_18.TXT
2: SHAPELIB/SHAPE_00.TXT
3: SHAPELIB/SHAPE_01.TXT
4: SHAPELIB/SHAPE_43.TXT
5: SHAPELIB/SHAPE_.TXT
6: SHAPELIB/UsedPart.abs
7: SHAPELIB/UsedNoKf.abs
Fig 6.6 Folder 1
The current folder will switch into /flash/DIR1 and then all supported G code files
under the current folder will be shown.
6.7.2 New Folder
It will be complex to new a folder. It needs to first enter into the edit file interface,
then new a folder.
In the file of own system, move the cursor to G code file name, as the figure 6.7
shows.
F1 DiskFile F2 UDisk F3 Search
F4
EditFile
F5 DelFile F6 CopyToU
F7
Preview
F8 OK
Work folder:/flash
0-/flash 1-DIR1 2-DIR2 3-DIR3 4-DIR4
5-DIR5 6-DIR6 7-DIR7 8-DIR8 9-DIR9
0001:SHAPELIB
0002:201MB.TXT
0003:REC_1.TXT
0004:CIRCLE_2.CNC
Fig 6.7 cursor moves to G code file name
To Next Page
Loading...
