FangLing F2500(A/B) - Page 2

F2000 Series Shape Cutting Control System Operation and Installation Manual
ii
REVISION HISTORY
Version Date Page Description
Spec.01 2011/8/10 All New manual creation
Spec.02 2012/2/28
Add Section 8.7.4, 8.7.5, 8.7.6, and
Chapter 14
Spec.03 2012/4/12
Add Section 8.7.6.1-8.7.6.3 and
3.11, modify Section 1.3
Spec.04 2012/8/8
Modify Section 4.1 and Chapter
14, add Section 6.7 and Appendix 2
Spec.05 2013/5/20
Perfect chart and catalog, integrate
F2000 series specification
Spec.06 2014/2/20
Add the section of arc THC module
usage illustration, interface
instruction.
In appendix 3, add the
interpretation of wiring with
F1620/F1630 THC.
Spec.07 2014/4/15
Merge the F2000T into the F2000
series manual.
In appendix 3, add the
interpretation of wiring with
PTHC-2.