Fanmaster HDR20 - Assembling Instructions

3. ASSEMBLING INSTRUCTIONS
Remove the heater from the carton. If the heater is damaged, please contact
Fanmaster or where you purchased the heater from.
1. Remove the 2 screws from the front xed ring
2. Place the protection panel on the bottom
3. Align the holes and t the 2 screws.
4. Front grill installation - align the 4 holes & x with screws
5. Handle installation - align the 2 holes & x with screws
6. Stand feet installation - align the 4 holes & x with screws
2. PRODUCT DESCRIPTION & SPECIFICATIONS
4 5 6