To Next PageTo Next Page
Need help?Do you have a question about the Fantec QB-X8US3R and is the answer not in the manual?
General| Interface | USB 3.0 |
|---|---|
| Number of Drives | 8 |
| Power Supply | External Power Adapter |
| Dimensions | 160x260x235 mm |
| Material | Aluminum |
| Transfer Speed | Up to 5 Gbps |
| Color | Black |
| Type | External |
| Supported Drives | 3.5 inch SATA I/II/III HDDs |
| RAID Levels | 0, 1, 3, 5, 10 |
Explains the meaning of various LEDs on the front panel of the device for status indication.
Procedure for changing and setting RAID modes using the device's buttons and confirmation button.
Explanation of RAID 0 Spanning (BIG) mode, concatenating drives into one large volume.
Explanation of 2x RAID 0 Spanning mode, similar to RAID 0 Spanning, detected as 2 drives.
Explanation of RAID 0 Striping mode, concatenating drives for performance improvement.
Explanation of RAID 5 mode, using distributed parity for drive failure redundancy.
Explanation of RAID 50 mode, combining RAID 5 and RAID 0 for redundancy and performance.
Explanation of RAID 10 mode, mirroring (RAID 1) within striping (RAID 0) for performance and redundancy.
Describes LED indicators for RAID 0 Spanning mode (Blue/Active, Purple/Transferring).
Describes LED indicators for RAID 0 Striping mode (Blue/Active, Purple/Transferring).
Describes LED indicators for RAID 5 mode (Blue/Active, Purple/Transferring, Red/Rebuild).
Describes LED indicators for RAID 50 mode (Blue/Active, Purple/Transferring, Red/Rebuild).
Describes LED indicators for RAID 10 mode (Blue/Active, Red/Rebuild).
Steps to initialize hard drives for Windows Vista and Windows 7 operating systems.
Steps to initialize hard drives using Disk Utility on Macintosh OS 10.5.
Key points regarding RAID mode changes, interface usage, and HDD recommendations.
Guidance on fan noise, initialization issues, transfer rates, and fan replacement.
Information on operating environment, fan speeds, OS compatibility, and transfer speeds.
