FANUC R-J3iB User Manual

1.SAFETY PRECAUTIONS SAFETY B-82604EN/01
-s-16-
(2) Step-on prohibitive label
Fig. 1.6 (b) Step-on Prohibitive Label
Description
Do not step on or climb the robot or controller as it may adversely
affect the robot or controller and you may get hurt if you lose your
footing as well.
(3) High-temperature warning label
Fig. 1.6 (c) High-temperature warning label
Description
Be cautious about a section where this label is affixed, as the section
generates eat. If you have to inevitably touch such a section when it
is hot, use a rotective provision such as heat-resistant gloves.

FANUC R-J3iB Specifications

General

Operating System	FANUC proprietary OS
Communication Ports	RS-232, Ethernet
Axes Control	Up to 8 axes
Programming Language	FANUC Karel, TPE
Power Supply	200-230V AC, 50/60 Hz
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Teach Pendant	FANUC Teach Pendant (A05B-2255-C100)