B-82604EN/01 OPERATION 5.SETTING UP CIMPLICITY HMI
- 17 -
5.3 REGISTERING DEVICES
Next, you will register devices.
1. Double-click Devices in the Equipment folder.
The New Device dialog box appears.
Set the following:
Device : Arbitrary (example : S90_DEV1)
Port : MASTER_TCPIP0 (the port registered in the previous step)
2. Click OK.
The Device Properties dialog box appears.
Set the following:
Model Type : GE Fanuc Series 90-30
To Next Page
Loading...