B-82604EN/01 OPERATION 5.SETTING UP CIMPLICITY HMI
- 19 -
5.4 REGISTERING POINTS
Next, you will register points. (Here, you will register DO[1])
1. Double-click Points of the tree.
The New Points dialog box appears.
Set the following:
Point ID : Arbitrary (here, DEV_DO1 is set.)
Type : Select Device and enter S90_DEV1 (this is the device that you
registered previously.)
Class : Select the class according to the data to be referenced. (here,
select Boolean.)
2. Click OK.
The Point Properties dialog box appears.
To Next Page
Loading...