B-82604EN/01 OPERATION6.ADDRESS ASSIGNMENT TO POINTS
- 23 -
CAUTION
When CIMPLICITY writes data to an input signal
such as DI and AI, the value changes momentarily,
then it is soon restored to its actual input value.
The momentary change in value, however, may
cause an unpredictable errors. Therefore, avoid
write into input signals such as DI and AI.
CAUTION
The reading from and writing to Weld Signal
Input/Output and Wire Stick Input/Output functions
are supported by R-J3iB system software 7D80, 45
or later, and 7D81, 09 or later, and R-30iA(R-J3iC).
To Next Page
Loading...