5 Install Guide
5.1 Use POE or external Power Adapter
i10/i10V/i10D, called as ‘the device’ hereafter, supports two power supply modes, power supply
from an external power adapter or over Ethernet (POE) complied switch.
POE power supply saves the space and cost of providing the device an additional power outlet.
With a POE switch, the device can be powered through a single Ethernet cable which is also
used for data transmission. By attaching UPS system to POE switch, the device can keep
working at power outage just like traditional PSTN telephone which is powered by the telephone
line.
For users who do not have POE equipment, the traditional power adaptor should be used. If the
device is connected to a POE switch and power adapter at the same time, the power adapter
will be used in priority and will switch to POE power supply once it fails.
Please use the power adapter supplied by Fanvil and the POE switch met the specifications to
ensure the device works properly.
To Next Page
Loading...
Need help?
General
