If any abnormality occurs,the induction hob
will automatically go into protective mode and
display one of the following codes:
Fault Possible cause Solutions
F3-F8 Temperature
sensor failure
Contact the
supplier
F9-FE Temperature
sensor of the
IGBT failure.
Contact the
supplier
E1/E2 Abnormal voltage
in power supply
Check if power
supply is normal.
Power on after
the power supply
is normal.
E3/E4 Abnormal
temperature
Check the pan.
E5/E6 Poor heat
radiation in
cooking zone
Restart when
cooking zone
cools down.
e above table shows how to assess and check
common faults.Do not dismantle the appliance
yourself,otherwise you may damage the
induction hob.
FAILURE DISPLAY AND INSPECTION
ENGLISH
To Next Page
Loading...
