4. To replace the door, hold the door in an open
position and insert the latches on both hinges
back into place. Open and close the door to
make sure that it has been tted correctly.
Latch
Warning:
To avoid possible electric shock, disconnect the
power supply and be sure the appliance is fully
cold before replacing the lamp.
Only use 25 W/220-240V~ type G9, T300
halogen lamps.
Replacing the oven light.
1. Switch o and disconnect the power from
the oven. Ensure that the internal parts are
cool before touching internal parts.
2. Remove the lamp cover by turning it
counter-clockwise (note, it may be sti),
replace the bulb with a new one of the same
type.
ENGLISH
To Next Page
Loading...
