• A means of disconnecting from the mains
supply is an opening distance between the
contacts of all poles, which must be provided
in the xed wiring in accordance with
installation regulations.
• Accessible surfaces may become very hot when
the appliance is in use.
• If the power cable is damaged, it must be
replaced by the manufacturer, their after-sales
service or a similarly qualied person to avoid
any hazards.
• CAUTION: Before accessing the connection
terminals, the power supply must be
disconnected.
• CAUTION: Use only the hob protection
systems designed by the cooking appliance
manufacturer, or indicated as suitable by
the appliance manufacturer in the operating
instructions, or the hob protection systems
that are built into the appliance. Using
unsuitable protection systems can lead to
accidents.
• During use, the appliance will become hot.
Be careful not to touch the heating elements
inside the oven.
ENGLISH
To Next Page
Loading...
