ENGLISH
GB-18
HOW TO USE WASHER
Before washing clothes for the rst time, you
must run a complete cycle without clothes. To
do these:
1. Connect the power and turn on the tap.
2. Turn the knob to position “Drum Clean”.
3. Press “Start/Pause”.
It can remove the water out which left in the
tub because of manufacturer’s checking out.
Washing preparation
1. Connect the inlet hoses well and turn on the
tap.
2. After making sure the power socket is
grounded reliably, insert the power plug into
the power socket.
3. Place the drain hose well.
To Next Page
Loading...