FAR LF814RG21DK - Troubleshooting Guide; Error Code Solutions

ENGLISH
GB-29
TROUBLESHOOTING GUIDE
Problem Error Code Possible Cause Solutions
e water of
machine lls
overtime.
“EOT' is on the
screen.
1. Water tap is not
open.
2. Drain hose is
put down.
3. Water inlet
valve is
damaged.
1. Open the water
tap.
2. Hook up the hose.
3. Change the water
inlet valve.
ere is a Door
lock alarm.
“E02” is on the
screen.
1. e door is not
locked well.
2. Garments is
caught between
the door and
seal.
3. Door lock is
damaged.
1. Lock the door
well.
2. Put the garment
into the drum.
3. Change the door
lock.
e machine
drains
overtime,
“E03” is on the
screen.
1. e drain hose
is squashed or
kinked.
2. e drain pump
lter is block.
3. e drainage
system pipes are
blocked.
1. Check the drain
hose.
2. Clean the lter.
3. Check the
drainage system
and clean it.
Water
overows
the machine.
/Water
sensor works
abnormal.
“E04” is on the
screen.
1. e water
inlet valve is
damaged.
2. e connection
between the
water sensor
and wire is not
secure.
3. e water sensor
is damaged.
1. Change the water
inlet.
2. Check the
connection and
ensure it is secure.
3. Change the water
sensor.