ENGLISH
GB-28
Important:
If the machine is exposed to temperatures below
0°C, certain precautions should be taken.
1. Turn o the water tap.
2. Unscrew the inlet hose.
3. Unhook the drain hose from the rear support
and position the end of this hose and that
of the inlet hose in a bowl. Run the spin
programme.
4. Disconnect the appliance.
5. Screw the inlet hose and reposition the drain
hose.
6. When you intend to start the machine up
again, make sure that the room temperature
is above 0°C.
To Next Page
Loading...