FAR LF814RG21DK - Page 72

ENGLISH
GB-30
Problem Error Code Possible Cause Solutions
e motor does
not work.
“E05” is on the
screen.
1. e connection
between the
motor and wire
is not secure.
2. e motor
is protected
because of over-
heat.
3. e motor is
damaged.
1. Check the
connection and
ensure it is secure.
2. Check if the
machine is
overloaded. Switch
o the machine,
and retry when the
motor becomes
cool.
3. Change the motor.
ere is a
heater fault.
“E06” is on the
screen.
1. e connection
between the
heater and wire
is not secure.
2. e heater is
damaged.
1. Check the
connection and
ensure it is secure.
2. Change the heater.
ere is a
temperature
sensor fault.
“E07” is on the
screen.
1. e connection
between the
temperature
sensor and wire
is not secure.
2. e temperature
sensor is
damaged.
1. Check the
connection and
ensure it is secure.
2. Change the
temperature sensor.