ENGLISH
GB-22
Washing steps
1. Turn on the watertap, and connect the power.
2. Open the door, and put the cloth into the
drum one by one.
3. Close the door, and put suitable amount
of detergent and fabric softener into the
dispenser, then close the drawer.
4. Choose a programme you need by turning
the knob.
5. Press “Start/ Pause” button to start the
washing machine.
6. When the cycle is nished, there is a warning
tone sounds.
Note
When washing cycle is nished, the
machine will change into standby
mode.
And the machine will be sleeping after
10 minutes without any control on the
control panel.
To Next Page
Loading...