ENGLISH
GB-61
A wash cycle can only be changed if it has
been running for a short time otherwise, the
detergent may have already been released and the
dishwasher may have already drained the wash
water. If this is the case, the dishwasher needs
to be reset and the detergent dispenser must
be relled. To reset the dishwasher, follow the
instructions below:
1. Press the Start/Pause button to pause the
washing.
2. Press Program button for more than
3seconds - the program will cancel.
3. Press the Program button to select the
desired program.
4. Press the Start/Pause button, after
10seconds, the dishwasher will start.
3 sec
CHANGING THE PROGRAM MID-CYCLE
To Next Page
Loading...
Need help?
General
