ENGLISH
GB-12
Please follow the steps below for adding
dishwasher salt:
1. Remove the lower basket and unscrew the
reservoir cap.
2. Place the end of the funnel (supplied)
into the hole and pour in about 1.5kg of
dishwasher salt.
3. Fill the salt container to its maximum limit
with water, It is normal for a small amount of
water to come out of the salt container.
4. After lling the container, screw back the cap
tightly.
5. e salt warning light will stop being after
the salt container has been lled with salt.
6. Immediately after lling the salt into the
salt container, a washing program should be
started (We suggest using a short program).
Otherwise the lter system, pump or
To Next Page
Loading...
