ENGLISH
GB-17
WARNING
• Do not over tighten the lters. Put the lters
back in sequence securely, otherwise coarse
debris could get into the system and cause a
blockage.
• Never use the dishwasher without lters in
place. Improper replacement of the lter may
reduce the performance level of the appliance
and damage dishes and utensils.
Spray arms
It is necessary to clean the spray arms regularly
for hard water chemicals will clog the spray arm
jets and bearings.
To clean the spray arms, follow the instructions
below:
To remove the upper spray
arm, hold the nut, rotate
the arm clockwise to
remove it.
1
To remove the lower spray
arm, pull out the spray
arm upward.
2
Wash the arms in soapy
and warm water and use a
soft brush to clean the jets.
Replace them after rinsing
them thoroughly.
3
To Next Page
Loading...
