CONFIGURATION OF THE COMPUTER - Windows XP
To open the control panel, select:
- START
- then LAYOUT
- and finally CONTROL PANEL.
Double click on
Sound and audio peripheral
This window will open:
Chose the AUDIO file
It is necessary to select a peripheral that corresponds with the
MIDI Music Reproduction MENU, which guides the MIDI data to
the outside. The name of this peripheral varies according to the
Audio file present in the computer; the most commonly found is
MPU-401
NOTE: If it is not possible to recognise the peripheral, try in turn all of
those present (normally there are not more than two or three), until the
correct one is found.
Click on OK
Now the computer is configured to use the external MIDI interface and
every MIDI file will be reproduced on the keyboard.
N.B.: even if the procedure is very simple, it can become difficult in the
presence of particular computer configurations. In this case it is advisable
to contact a computer technician who will easily be able to resolve the
problem. (Continues on page 19 par. “System function test”).
To Next Page
Loading...
