Farho XANA PLUS User Manual

Fitting and Operating Instructions
XANA PLUS
Warning
Please read these instructions carefully and keep them for future consultation.
This heater must be installed by an accredited, qualified electrician and must
observe Low Voltage Regulations. The installation as a whole should meet the
provisions of aforesaid regulation. Any claim presented will be deemed invalid
if the prevailing regulations have not been met.

Farho XANA PLUS Specifications

General

Type	Electric Radiator
Power supply	Electric
Voltage	230V
Frequency	50Hz
Heating Power	2000W
Safety Features	Overheat protection
Mounting	Wall-mounted
Connectivity	WiFi

Summary

Instructions for Use

General Information

Provides an overview of the heater, its design, manufacturing, and importance of insulation for efficiency.

Description of the Keypad and Display

Explains the function of each key and the meaning of icons and indicators on the radiator's display.

How to Set the Clock

How to Adjust Room Temperature

Details on using the keypad buttons to increase or decrease the desired room temperature setting.

Activating and Deactivating Programmes

Customising Heating Programmes

Detailed steps for modifying existing or creating new daily heating schedules with specific times and temperatures.

Resetting the Radiator

Troubleshooting

Radiator Not Responding to Controls

Troubleshooting steps for issues where the radiator's keypad is unresponsive, including checking for keypad lockout.

Radiator Not Producing Heat

Diagnoses common reasons why the radiator may not be heating, such as incorrect settings or ambient temperature.

Fitter's Instructions

Power Supply Requirements

Ideal Radiator Positioning

Mounting and Fitting Procedures

Guarantee Terms and Conditions