To Next Page
M
michaelharmonSep 13, 2025
What causes the outer wing cylinders to extend immediately during the initial unfold of my Farm King 1460?
- LLisa RobbinsSep 13, 2025
This can be due to two reasons: 1. The tractor's hydraulic flow is set too high. Reduce the tractor’s flow until wings fold properly, ideally to 4 to 6 GPM. 2. The sequence valve enabling pressure is set too low. Adjust the valve pressure by 1/2 turns (180°) clockwise until outer wings remain fixed during the initial unfold stage.
General
