Firmware and Installation Instructions for the Focus3D X 30/130/330
Quick Steps
The latest version of the FARO
®
Laser Scanner Focus
3D
X30/130/330 and FARO
®
Laser Scanner Focus
3D
X130/
330 HDR firmware is 5.5.7.50152, released 15 January, 2017.
1. Click here to download the firmware.
2. Unzip the firmware file.
3. Transfer 1_firmware.LsSetup from the computer to the Scanner.
4. Transfer 2_firmware.LsSetup from the computer to the Scanner.
5. Confirm results.
What's New
Click here to download the latest release notes and get details about what has changed.
Who Needs This Upgrade
If your scanner was serviced by FARO after 15 January, 2017, the latest firmware was loaded by the service technician.
You can check the firmware version number to be sure you have the latest.
1. On the Scanner, go to Manage > General Settings > Scanner Details.
2. If the firmware version number is Rev5.5.7.50152, you have the latest firmware and no further action is necessary.
If you have an earlier version, upgrade the firmware as instructed in this article.
Video
This 2.5-minute YouTube video shows you what you can do with the Scanner and highlights some of its more powerful
features.
https://knowledge.faro.com/Hardware/Laser_Scanner/Focus/Firmware_and_Installation_Instructions_for_the_Focus3D_X_30-130-330
Updated: Thu, 23 Mar 2017 05:05:58 GMT
1
To Next Page
Need help?
General
