Fastcorp DIVI - Page 28

Fastcorp, LLC
DIVI Setup and Users Guide
Page 28 of 62 Rev 6
g) Now you will be prompted to “SET ARM AT DELIVERY”. Position the arm as shown in figure 9B in the
previous section. Press the “#” key to accept. Display will show “SELECTION STORED”
h) You may now program your selections as described in the “PROGRAMMING YOUR MACHINE” section.
31. SERVICE MENU:
A. Change Price –
(1) Changes the Price of programmed selections.
Display
Programming Instructions
1) Change Price
a) Press the # = Yes key to enter Menu
Option
* = NEXT
D=Back
#=Yes
Edit Selection
b) Enter the selection number
# - Exit
A1 Price: 1.00
c) Type over the price. Press # to accept
* = Exit
* = Exit
A1 Price: 1.50
d) Press the # = Accept key to enter the
price change
* = Exit
* = Exit
1.
B. SALES METERS –
(1) Provides access to Total and Resettable Meters. Total Meter displays Total Sales data in
units sold and currency. The Resettable Meter displays total sales data for each selection in units
sold and currency. Resettable Meter sales data may be cleared and reset to 0 after each service
visit.
Display
Programming Instructions
Programming Instructions
a) Press the #=Yes key to enter Menu Option
* = Next
D = Back
# = Yes
Total Vends * = Nxt
b) Total Meter count of units sold.
Press *=Nxt to continue.
975
Total Value * = Nxt
c) Total Meter count in currency
Press *=Nxt to continue
1575.30
Selection
A1
d) Press the * key to scroll through selection numbers
to view sales data.
25
40.00
Selection
A2
e) Press the * key to scroll through selection numbers
to view sales data.
25
72.50
Reset Vends
* = Nxt
f) View Total Resettable units sold. Press *=Nxt to
continue
225
Reset Value
* = Nxt
g) View Total Resettable Sales in currency. Press *=Nxt
to continue.
375.25
Reset Card
* = Nxt
h) View Total Resettable Sales in Credit Card.
Press *=Nxt to continue.
115.50
Clear All
i) Press # to clear Resettable Meters and continue.
OK?
* = No
# = Yes
Resettables Cleared
j) Long beep and Resettable Meters will be reset to 0.